click for larger view Series A2C-M Automatic Washing Machine Water Shutoff Valve

The Watts IntelliFlow Automatic No. 2 (A2C-M) is equipped with a state of the art electric current sensing device. When the washer is turned on, the device senses the current flow to the washer and opens the valves. Upon completion of the full wash cycle when the washer shuts off, the device will sense the lack of current and close the water valves. Such automatic operation protects against a water damage repair situation should a washing machine inlet hose burst while the machine is unattended. When the shut-off valves are left on, the constant water pressure can cause hose fatigue. This can increase the potential for leakage or a burst hose. For added protection the leak sensor will sense any leaks during the wash cycle and automatically shut off the water valves to prevent flooding & potential water damage if a leak occurs.

IntelliFlow A2C-M Specifications: UL listed Maximum Pressure: 150psi (10 bars) Maximum Temperature: 180°F (82°C) 115VAC, 15A, 60Hz Cord: 15ft Current draw (with appliance off): 20mA Maximum appliance current rating: 15A Circuit breaker requirement: 15 amp. GFI * * It is suggested that the electrical power source be ground fault protected. Please Note: The IntelliFlow is not compatible with washing machines or combination washer/dryers that are 220VAC powered. In order to use the Intelliflow with 220VAC powered appliances, you'll need to use it with the IntelliTimer. The Watts A2-IntelliTimer is a remote timer which allows the IntelliFlow® to be used in applications where the washing machine or a combination washer/dryer is 220 VAC powered.

IntelliFlow™ Systems
Model #	Size	Adapter Fitting/Description	Price & Quantity
A2C-M1	1/2"	Surface mount system - solder - with leak sensor	$195.28
A2C-WB-M1	1/2"	Recessed mount with wall box - solder and/or thread - with leak sensor	$212.62
Retrofit Kits - for use with the valves shown above
Model #	Size	Description	Price & Quantity
KA2-BD	1/2"	For straight or angled shutoffs - includes glue - click here for parts breakdown	$69.49
KA2-A	1/2"	Standard surface mount	$70.42
KA2-R	1/2"	To adapt to existing wall box with single lever washing machine valve	$70.86
A2-IntelliTimer
Model Name	Description		Price & Quantity
A2-IntelliTimer	A remote timer which allows the IntelliFlow® to be used in applications where a combination washer/dryer is 220 VAC powered. Activation of the push button on the timer causes current flow, which is detected by the Intelliflow® then actuates the solenoid valves, allowing water to flow to the washing machine. This also begins a timing sequence of two hours, which, upon its completion de-energizes the IntelliFlow®.		$142.71

- Or -

Dimensions/Weight:

Model A B C D E Weight A2C-M1 6" 2 1/8" 4 1/4" 3 1/32" 2 3/8" 2.0 lbs. A2C-M1-WB 8" 2 1/8" 4 1/4" 3 1/32" 2 3/8" 3.5 lbs.

Easy Installation: The Watts A2C-M1 IntelliFlow® comes equipped with 1/2" (13mm) sweat adapters to receive tubing. Either connection may be used for the hot or cold water supply because the A2C-M1 is equipped with long wearing Buna-N diaphragms for long life. Water supply connections are 23/8" (60mm) on centers. No electrical wiring is required. Simply plug the washing machine power cord into the IntelliFlow® and plug it to the standard 15A, GFI*, 115 volt outlet. *Ground fault interrupter circuit

Typical Installations: The Watts IntelliFlow® can be installed in new construction or as an upgrade to existing installations.