Compact Water Softener - Model 340 - for private or municipal water systems
Compare these features: Solid state valve uses 80% less water 2 a.m. controlled regeneration with four regeneration options Display gallons of soft water available Includes water hardness test strip Includes FDA approved hose and easy installation kit Easy-to-program, water-efficient, solid state electronic, demand-metered valve regenerates based on usage Compact size (25" x 15-1/2" 24") fits conveniently in spaces too small for a conventionally sized softener Ultra-high capacity resin for maximum hardness and iron reduction Strong, corrosion proof fiberglass wound mineral tank with polyethylene liner. NSF certified Removable cabinet for easy cleaning. Easy access salt compartment holds 120 pounds Rugged high-density rustproof base protects mineral tank from damage Safety brine mechanism protects unit from overflowing, even during power failures Bypass valve standard for easy installation and service
Model 340 Water Softener = $1208.75 Please note that there are locations (cities/municipalities/counties) in California that do not allow the installation of any brand/model of water softener, and some allow only California validated models. Prior to purchasing any water softener, we recommend that you check with your local authorities. If you find that you must have a California validated model, you can click here for our California Validated Water Softener. - Or -
Specifications for Model 340 Water Softeners   Model # 340-0005 Dimensions 25" x 15-1/2" 24" Fleck Valve Style 5600SE Mineral Bed Capacity Grains 28,800 Salt Setting 5.2 lb. Equiv. Hardness Removal Max. 50 GPG * Iron Removal Clear Max. 3 PPM * High Capacity Resin 0.9 cu. ft. Flow G.P.M. Service Max Backwash Min. 4 2.4 * Performance based on optimum conditions. All softeners ability to enhance water quality depends on the variety of demands placed on the unit, due to water factors, such as pH, dissolved solids, flow rates, and others. * Valve includes manifold for easy connection.

Water Softener - Model 341 - for private or municipal water systems
	Compare these features: Patented metered valve regenerates based on actual water usage, saves up to 50% in water and salt by regenerating only when needed Automatic internal bypass valve for constant household water flow even during regeneration cycles Dual tank design for ease maintenance and maximum 250 lbs. salt storage capacity Factory set 2 a.m. regeneration time prevents untreated water from being use while doing laundry and other household chores Clear water iron removal up to 3 PPM Safety brine overflow protects unit from overflowing, even during power failure Corrosion resistant tanks, maintenance free! Bypass valve standard for easy installation and service Model 341-0005 Water Softener = $946.98 Model 341-0006 Water Softener = $1026.45 - Or -
Specifications for Model 341 Water Softeners   Model # 341-0005 Model # 341-0006 Fleck Valve Style 5600DR 5600DR Mineral Bed Capacity Grains 24,000 32,000 Hardness Removal Max. G.P.G. 50 50 Iron Removal (Clear)1 Max. P.P.M. 3 3 Fine Mesh Resin cu. ft. 3/4 1 Space Required Brine Tank Mineral Tank 18" x 33" 8" x 52" 18" x 33" 10" x 49" Flow Rate F.P.M. Service Max2 Backwash Min. 7 1.2 8 1.5 Salt Storage Capacity 250 lbs. 250 lbs.   1 - Removes iron in solution (Ferrous "clear" iron) up to amounts shown. 2 - Maximum service flow rates through the softener must never exceed the specified flow rate in gallons per minute.

Water Softener - Model 342 - for private or municipal water systems
Compare these features: Patented metered valve regenerates based on actual water usage, saves up to 50% in water and salt by regenerating only when needed Automatic water bypass for constant household water flow during regeneration Single tank design for space efficiency Clear water iron removal up to 3 PPM Bypass valve standard for easy installation and servicing Safety brine overflow protects unit from overflowing, even during power failure Model 342-0005 Water Softener = $1052.92 Model 342-0006 Water Softener = $1075.68 - Or -
Specifications for Model 342 Water Softeners   Model # 342-0005 Model # 342-0006 Fleck Valve Style 5600DR 5600DR Mineral Bed Capacity Grains 24,000 32,000 Hardness Removal Max. G.P.G. 50 50 Iron Removal (Clear)1 Max. P.P.M. 3 3 Fine Mesh Resin cu. ft. 3/4 1 Total Space Required 14" x 20" x 44" 14" x 20" x 44" Flow Rate F.P.M. Service Max2 Backwash Min. 7 1.5 8 1.5 Salt Storage Capacity 200 lbs. 200 lbs.   1 - Removes iron in solution (Ferrous "clear" iron) up to amounts shown. 2 - Maximum service flow rates through the softener must never exceed the specified flow rate in gallons per minute.

Low Salt Detector

Features: Designed to alert you with a beeping sound when salt is needed in your water softener No drilling necessary, self drilling screw allows for installation with a Phillips Head screwdriver Easy to install alarm simply velcros to the salt holding tank 9-volt battery included with each unit (battery life averaged 3-5 years during testing)

Low Salt Detector = $23.47

- Or -