 |
|||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||
Parts for Waste-King SS5000TC
from Anaheim Mfg
go to drainage air gaps - go to Reinforced air gap to dishwasher discharge hose
go to flanges, stoppers & splash guards for Waste King - go to how to help prevent clogged drains
| Item # | Description | Price | Item # | Description | Price & Quantity |
| 1 | Stopper | $17.54 | 34 | Upper shell | $6.26 |
| 2 | Sink flange | $14.98 | 35 | Lower shell | $5.96 |
| 3 | Rubber gasket | $1.99 | 36 | Shell screw - 3 required per unit | N/A |
| 4 | Fiber gasket (waxed) | $2.29 | 37 | Plunger button | Included with #65 |
| 5 | Supporting ring | $4.29 | 38 | O-ring (2 req.) - each | Included with #65 |
| 6 | Mount ring | $7.39 | 39 | Bushing | Included with #65 |
| 7 | Cushion mount ring | $3.99 | 40 | O-ring | Included with #65 |
| 8 & 9 | Outlet flange & screws - (inc. 1 flange & 2 screws) | $3.89 | 41 | Screw - 4 required per unit, sold each* | Included with #65 |
| 10 | Outlet elbow | $3.30 | 42 | Collar | Included with #65 |
| 11 | Rubber outlet gasket | $2.19 | 43 | Switch cover | Included with #65 |
| 12 | Grind ring | N/A | 44 | Screw - 3 required per unit, sold each* | Included with #65 |
| 13 | Drain housing | N/A | 45 | Screw - 2 required per unit, sold each* | Included with #65 |
| 14 | Thrust washer | $1.29 | 46 | Cherry switch | Included with #65 |
| 15 | Water seal | N/A | 47 | Switch bracket | Included with #65 |
| 16 | Spacer seal | N/A | 48 | Jam nut | Included with #65 |
| 13-16 | Drain housing assembly - includes 13-16 | $23.79 | 49 | Spring | Included with #65 |
| 17 | Slinger | $1.23 | 50 | Washer | Included with #65 |
| 18 | O-ring | $1.98 | 51 | Washer | Included with #65 |
| 19 | Turntable assembly (includes 17-19) | $23.78 | 52 | Retainer - 2 required per unit, sold each* | Included with #65 |
| 20 | Hopper | N/A | 53 | Bushing | Included with #65 |
| 21 | Hopper screw - 4 required per unit, sold each* | $1.99 | 54 | Bushing | Included with #65 |
| 22 | Mounting Ring Adapter | $13.93 | 55 | Connector flag - 2 required per unit, sold each* | Included with #65 |
| 23 | Gasket | $0.84 | 56 | Conduit clamp | Included with #65 |
| 24 | Washer | $0.82 | 57 | Screw | Included with #65 |
| 25 | Armature assembly | N/A | 58 | Conduit | Included with #65 |
| 26 | Motor stud | $1.08 | 59 | Lead wire | Included with #65 |
| 27 | Motor stud | $1.06 | 60 | Lead wire | Included with #65 |
| 28 | Motor shell assembly | N/A | 61 | Splice | Included with #65 |
| 29 | Endbell | N/A | 62 | Bushing | Included with #65 |
| 30 | Brush motor & brush spring assembly | $5.97 | 63 | Conduit clamp | Included with #65 |
| 31 | Nut -2 required per unit, sold each* | $1.99 | 64 | Screw | Included with #65 |
| 32 | Inspection plate | $3.98 | 65 | Locktop collar assembly | $59.44 |
| 33 | Nut | $1.99 | Sinkflange gasket - thick (not shown) | $1.99 |
*Order "required per unit" quantity for greater savings!
| - Or - |  |
Generally the simple solution to this is to clean the disposer by having it grind up
a few cups of ice and some table salt. This helps to cut the grease and
slime off the sides of the disposer. Then flush it out with cold water
followed by half of a lemon or lime to deodorize.
