| Folding Shower Seat (Tilt-Up) Product Information |
 |
This durable, sturdy seat holds up to 250 pounds!
The tilt-up seat easily mounts to any wall and conveniently tilts up after use, requiring minimal space. It is made of select moisture-resistant IROKO wood, supported by a brass tubular frame. This frame is either plated or powder coated, and is available in chrome, white, brass, oil rubbed bronze, or satin nickel to enhance the design.
The tilt-up seat shower seat is supported with mounting brackets (included) for easy installation to a stud wall or header bar. It can be mounted a masonry, tiled, or blocked wall. The mounting brackets must be anchored to a solid structure to assure safety and security. Complete installation instructions and component kit are included with the folding shower seat.
|
| click here to purchase a folding shower seat |
|
INSTALLATION GUIDE: |
 |
COMPONENTS:
- 1 - Seat Assembly
- 6 - Flat Head Screws
- 6 - Plastic Anchors
- 2 - Wall Brackets
- 2 - Bracket Covers
- 2 - Mounting Pins
- 4 - Pin Caps
|
|
 |
STUD WALL: MOUNTING (WOOD)
- 16" on center (use template provided)
- Use (4) flat head screws provided for this installation
- Screws should penetrate into the studs a minimum of 1-1/2"
- A 1/4" dia masonry tool bit should be used to drill thru tile and wonder board for screw clearance hole
|
|
 |
HEADER:
- 16" on center (use template provided)
- Header to be 2" x 6" or equivalent and must be an adequate anchor base, secured into studs
- Use (6) flat head screws provided for this installation
- Screws should penetrate into the header a minimum of 1-1/2"
- A 1/4" dia masonry tool bit should be used to drill thru tile and wonder board for screw clearance hole
|
|
 |
MOUNTING: (MASONRY, BRICK OR BLOCK WALL)
- 16" on center (use template provided)
- Install (6) plastic anchors provided for this installation
- A 5/16" dia masonry tool bit should be used for this application
|
| click here to purchase a folding shower seat |
