- Or -

The "Elfin" Mop Sinks
Elfin EB-54	The Elfin is a rugged economical unit with plain curbs on all sides. It is installed quickly in one single operation on the finished floor. All models except the corner unit come with a 3" centered brass drain with removable flat stainless steel strainer and screws. The drain for the corner model is located 12" off the back walls to help avoid spills. This unit can be furnished with aluminum or vinyl bumper guards, OR cast integral stainless steel caps, on the exposed sides of the basin. The Elfin is available in four square models, two rectangular, and one corner model. If you would like to add splash guard panels to your sink click here. Click for Elfin SQUARE dimensions Click for Elfin RECTANGULAR dimensions Click for Elfin CORNER dimensions
Elfin EB-54
Elfin EBC-150
Model No. Overall Dim. Price & Quantity Elfin SQUARE Mop Sinks Note: Must order Speedi Drain Connectors sold separately below EB-54 24" x 24" x 6" $389.90 EB-66 30" x 30" x 6" $399.26 EB-70 32" x 32" x 6" $410.70 EB-78 36" x 36" x 6" $460.16 Elfin RECTANGULAR Mop Sinks Note: Must order Speedi Drain Connectors sold separately below EBR-66 36" x 24" x 6" $430.80 EBR-74 36" x 32" x 6" $480.29 Elfin CORNER Mop Sinks Note: Must order Speedi Drain Connectors sold separately below EBC-150 36" x 36" x 6" $429.68 Bumper Guards - for these mop sinks only V-70-24 Extruded Vinyl 24" $24.95 V-70-36 Extruded Vinyl 36" $26.95 A-20-24 Aluminum 24" $44.49 A-20-32 Aluminum 32" $47.95 A-20-36 Aluminum 36" $51.95 Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks TC-3 For XHCI, plastic and steel pipe 3" $13.30 TC-3-NH For SV and NHCI pipe 3" $13.92 TC-3-2 Reducer with 2" hole 3" $19.16

Due to the weight and to ensure safe delivery, these mop sinks ship by truck and have a $100 additional shipping fee.

- Or -

The "MTB" Mop Sink
MTB-2424	MTB-3624
Click here for MTB-2424 dimensions	Click here for MTB-3624 dimensions
The MTB was designed to fill the need for a mop sink in a lower price range, but with good splash protection. It is normally not equipped with tiling flanges, so sealant should be applied where basin meets the wall. Flanges are available upon request. Each exposed side can be equipped with vinyl or aluminum bumper guards, OR cast integral stainless steel caps. Please see the accessories section for additional information on the bumper guards. We offer the MTB in two sizes, both of which have 3" centered brass drains cast integral and a stainless steel dome strainer and screws. If you would like to add splash guard panels to your sink click here.
Model No. Overall Dim. Price & Quantity MTB-2424 - SQUARE Note: Must order Speedi Drain Connectors sold directly below 24" x 24" x 10" $339.48 MTB-3624M - RECTANGULAR Note: Must order Speedi Drain Connectors sold directly below 36" x 24" x 10" $359.95 Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks TC-3 For XHCI, plastic and steel pipe 3" $13.30 TC-3-NH For SV and NHCI pipe 3" $13.92 TC-3-2 Reducer with 2" hole 3" $19.16

Due to the weight and to ensure safe delivery, these mop sinks ship by truck and have a $100 additional shipping fee.

- Or -

The "Serviceptor" Mop Sinks
Serviceptor SB-902	The most complete line of terrazzo Serviceptors for corner, recessed, pier or island installations, we offer models in a choice of 4 sizes. All sinks are available with plain shoulders or integrally cast 20 gauge continuous stainless steel cap. Terrazzo composed of pearl gray marble chips cast in white Portland cement which produces a compressive strength of 3000 PSI seven days after casting; then ground smooth, grouted and sealed to resist stains and moisture. Brass drain body is cast integral and provides for a caulked connection of not less that 1" deep to a 3" pipe. Drain is centered on all models and comes with a flat stainless steel strainer and screws. Installs on the finished floor If you would like to add splash guard panels to your sink click here Click for Serviceptor SQUARE dimensions Click for Serviceptor RECTANGULAR dimensions
Serviceptor SB-302-L
Serviceptor SB-202-R

w/ Continuous One-Piece Stainless Steel Cap

Model No.	Overall Dim.	Flanges	Price & Quantity
Serviceptor SQUARE Mop Sinks Note: Must order Speedi Drain Connectors sold separately below
SB-900	24" x 24" x 12"	0	$628.50
SB-901	24" x 24" x 12"	1	$626.74
SB-902	24" x 24" x 12"	2	$628.47
SB-903	24" x 24" x 12"	3	$627.62
SB-700	32" x 32" x 12"	0	$898.02
SB-701	32" x 32" x 12"	1	$900.09
SB-702	32" x 32" x 12"	2	$900.36
SB-703	32" x 32" x 12"	3	$902.02
SB-500	36" x 36" x 12"	0	$999.75
SB-501	36" x 36" x 12"	1	$998.05
SB-502	36" x 36" x 12"	2	$998.50
SB-503	36" x 36" x 12"	3	$997.95
Serviceptor RECTANGULAR Mop Sinks Note: Must order Speedi Drain Connectors sold separately below
SB-300	36" x 24" x 12"	0	$779.18
SB-301	36" x 24" x 12"	1	$780.39
SB-302-L*	36" x 24" x 12"	2	$780.39
SB-302-R*	36" x 24" x 12"	2	$779.06
SB-303	36" x 24" x 12"	3	$781.68
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3 For XHCI, plastic and steel pipe	3"	-	$13.30
TC-3-NH For SV and NHCI pipe	3"	-	$13.92
TC-3-2 Reducer with 2" hole	3"	-	$19.16

* Flange is across back and on LEFT side on model numbers ending in "L"
Flange is across back and on RIGHT side on model numbers ending in "R"

Due to the weight and to ensure safe delivery, these mop sinks ship by truck and have a $100 additional shipping fee.

- Or -

LESS Caps, w/ Plain Shoulders

Model No.	Overall Dim.	Flanges	Price & Quantity
Serviceptor SQUARE Mop Sinks Note: Must order Speedi Drain Connectors sold separately below
SB-800	24" x 24" x 12"	0	$490.07
SB-801	24" x 24" x 12"	1	$490.56
SB-802	24" x 24" x 12"	2	$489.56
SB-803	24" x 24" x 12"	3	$489.98
SB-600	32" x 32" x 12"	0	$639.87
SB-601	32" x 32" x 12"	1	$638.66
SB-602	32" x 32" x 12"	2	$641.28
SB-603	32" x 32" x 12"	3	$640.83
SB-400	36" x 36" x 12"	0	$783.25
SB-401	36" x 36" x 12"	1	$780.91
SB-402	36" x 36" x 12"	2	$782.70
SB-403	36" x 36" x 12"	3	$780.75
Serviceptor RECTANGULAR Mop Sinks Note: Must order Speedi Drain Connectors sold separately below
SB-200	36" x 24" x 12"	0	$610.37
SB-201	36" x 24" x 12"	1	$611.28
SB-202-L*	36" x 24" x 12"	2	$611.31
SB-202-R*	36" x 24" x 12"	2	$609.63
SB-203	36" x 24" x 12"	3	$609.82
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3 For XHCI, plastic and steel pipe	3"	-	$13.30
TC-3-NH For SV and NHCI pipe	3"	-	$13.92
TC-3-2 Reducer with 2" hole	3"	-	$19.16

* Flange is across back and on LEFT side on model numbers ending in "L"
Flange is across back and on RIGHT side on model numbers ending in "R"

Due to the weight and to ensure safe delivery, these mop sinks ship by truck and have a $100 additional shipping fee.

- Or -

Splash Catcher Panels / Wall Guards
	Features: 20 gauge stainless steel for durability Prevents unwanted splashing Helps protect your wall from rotting 12" high Lengths available in different sizes to meet your needs

- Or -

Side & Rear Splash Guards For 9-OP Series (Floor) Mop Sinks
	Features: Constructed of 16 gauge stainless steel for durability Prevents unwanted splashing and improves sanitation by containing the spillage of waste water Helps protect your wall from rotting 16" Tall

- Or -

Mop Sink Faucet

This mop sink faucet features: Excellent engineering design and qualified-skilled craftsmanship inside and outside. Integral spring check valves to prevent cross-flow of hot and cold water. Heavy duty brass construction and polished chrome body. Color coded red and blue handles. Includes heavy duty bucket hook. 8" Centers 3/4" MHT spout 5" spout, vacuum breaker and wall bucket with 12" rod. 1/2" NPT female inlets.

Mop Sink Faucet = $162.59

- Or -

Mop Sink Faucet

This mop sink faucet features: Fitting with vacuum breaker Adjustable top brace 3/4" hose thread on spout with bucket hook inlets 8" on center Rough chrome or polished chrome finish

Model No. Description/Finish Price & Quantity T-10-VB Mop Sink Faucet - Rough Chrome $114.80 T-15-VB Mop Sink Faucet - Polished Chrome $163.87

- Or -

Mop Sink Faucet

This mop sink faucet features: Durable rough-chrome finish 6-1/2" Spout length 3/4" MHT end spout Front bucket hook included 8" Centers Service faucet with vacuum breaker

Model # K-240 - Mop Sink Faucet = $394.75

- Or -

go to Fisher service sink faucets - go to Speakman service sink faucets - go to more faucets

Hose for Mop Sink

This mop sink hose features: Hose and wall hook 36" long 3/4" chrome couplings Stainless steel wall bracket

Model # T-35 - Mop Sink Hose = $34.95

- Or -

Stainless Steel Mop Hanger

24" long w/ 3 rubber spring loaded drips Model # T-40 - Mop Hanger = $74.95

- Or -

Hot Water Hose
Click image to enlarge	Features: Works great for filling mops sinks with hot water Can withstand temperatures up to 180°F 500 PSI burst pressure Extra durable crush resistant couplings (5/8" I.D.) Great for use in: commercial duty, farm equipment, home or business

Item Description	Price & Quantity
Hot Water Hose - 5/8" x 25ft.	$29.59
Hot Water Hose - 5/8" x 50ft.	$39.97

- Or -

We hope that we have helped you with commercial mop sinks at PlumbingStore.com