DRIP Laser Tubing Information- PlumbingStore.com

Laser Emitterline Information

The Laser-Drilled Emitter line consists of 1/4" od drip tubing with laser drilled holes every 9". These holes are drilled backwards, away from the direction of flow - the tubing is marked as to the correct direction - so the water seeps out of the holes. At 20 psi it will produce approximately 2.3 gph per foot.

Parallel lines are shown watering a small vegetable garden. You can use 1/4" couplings to connect to .700 supply tubing

For larger trees, a loop can be made off the .700 supply tubing.

Planter boxes and pots can be watered with it. An in-line valve can be used to adjust the discharge rate or to isolate certain pots.

read many interesting quotes, such as:
"If you look at life one way, there is always cause for alarm." - Elizabeth Bowen

Alphabetical Product Listing: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

go to contact us | go to our welcome page | go to faq's
go to privacy guarantee | go to return policy | go to view cart
The most convenient mail-order Plumbing Store.


	Copyright © 1995-2010. PlumbingStore.com