| Specifications (for the below drinking water coolers) |
| General - Self-contained, ADA Compliant, electric refrigerated wall-mounted water cooler with softly rounded corners and edges, designed to be easily accessible to physically challenged individuals. |
| Easy-To-Install - The large opening in the back makes most retrofit applications easier. |
| Easy to Service - Routine service and maintenance can be easily performed through the front of the unit by simply removing two panels. |
| Impact Resistant - Voyager's durable construction makes it an ideal water cooler for schools, malls, stadiums, office buildings and other high-traffic areas. |
| Cabinet - Molded two-tone gray space-age polymer with softly rounded edges. Resistant to impact, wear, corrosion, heat and sunlight. |
| Cooler Top - Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain. Anti-splash design reduces splatter. Contour design and integral strainer insure proper drainage. |
| Bubbler - Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. |
| Push Bar Actuation Mechanism - Self-closing light-touch push bars require minimal pressure to activate. |
| Automatic Actuation Mechanism (HTV8EE-Q & HTV8BLEE-Q) - Features infra-red light beam
emitting sensor and a solenoid valve. Upon interruption of the light beam, the sensor
actuates the solenoid valve to flow water. User does not have to touch the water cooler to
obtain a drink of water. The water flow is automatically shut-off after 30 seconds or
earlier if the user leaves the sensing range. Supplied with a built-in time delay to avoid
nuisance actuation from passers-by. |
| Automatic Stream Height Regulator - Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically
maintained under line pressures that vary from 20 to 105 psi. |
| Solenoid Valve / Inlet Strainer - Self-closing solenoid valve includes easily
cleaned in-line strainer that screens particles of 140 microns or larger before they enter the waterway. |
| Temperature Control - Positive sensing thermostat for controlling
temperature of storage tank water. Factory set at 50° F Adjustable ± 5° F. |
| Storage Tank - Non-pressurized stainless steel evaporator/storage tank for long life.
Waterways are classified by Underwriters Laboratories, Inc. in accordance with
ANSI/NSF 61, Section 9, far exceeding the requirements of the Safe Drinking Water Act. |
| Refrigeration System - Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and fan cooled copper/aluminum condenser with self lubricated bearing. System uses R134A refrigerant. |
