Plumbing store - flood prevention products

Prevent Flood Damage with FloodStops

go to clothes washer shut-off valves - go to float switches for pumps - go to water alarms

FloodStop System for Washing Machines

FS 3/4-H90
FS 3/4-H

FloodStop (FS 3/4-H90 and FS 3/4-H) automatically shut off the water supply to the Washing Machine and sounds an alarm, leaving all other household fixtures and appliances operational. Powered by AC Adaptor/Transformer or Batteries. Output contacts available, which allow the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in ten minutes. 1-Year Manufacturer's Warranty.

Prevent flooding from failed Washing Machines and hoses:
Washing Machines are one of the most damaging appliances within the home. Washing Machine related flooding can happen at any time, from hoses with ruptures or cracked fittings, to internal failures from clamps, valves, pumps, drains and failed switches. Whether at home, at work, or on vacation these flooding events go undetected for hours or even days.

FloodStop (FS 3/4-H90 and FS 3/4-H) Components:
Motorized Ball Valves (Two valves, 3/4" swivel hose thread union)

Control Unit (with Battery Backup 4 X C Size)

Water/Leak Sensor (1-1/4" X 7-1/2")

AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)

Output Contact Wires (2)

How FloodStop (FS 3/4-H90 and FS 3/4-H) Work:
Each FloodStop valve is screwed onto the hot and cold water hose bibs

Water/leak sensor is placed on the floor behind Washing Machine

Valves stay open until water loss is detected

Water on sensor immediately closes FloodStop valves and sounds alarm

Valves stay closed until problem is attended to and system is reset

Without FloodStop, Flooding Will Continue:
Unexpected appliance failures cause flooding and water damage, which will continue unabated until the problem is discovered and the water supply is manually shut off.

With Flood Stop, Property Damage is Avoided:
Water loss from unexpected appliance failures and hose ruptures are detected by FloodStop's water/leak sensor, and the water supply is automatically and immediately shut off.

Model # Description Price & Quantity
FS 3/4-H90 3/4" Hose Threaded Motorized Ball Valves with 90 Degree Downward Outlet (Brass) $135.64
FS 3/4-H 3/4" Hose Threaded Motorized Ball Valves (two) With Inline Outlet (brass) $135.59
FSAS Additional Sensor for FloodStop Systems - more information $13.54
FSC2VEW Controller to valve extension wire - extends reach by 9 feet $13.38

Order 10 or more #FS 3/4-H90 or #FS 3/4-H FloodStops for additional savings!

- Or -

Need quality flexible hoses for washing machines? Click here

FloodStop System for Water Heaters

FS-3/4-NPT
FS 3/4-C (compression)
FS-1-NPT
FloodStop (FS 3/4) kit automatically shut off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. Powered by AC Adaptor/Transformer or Batteries. Output contacts available, which allow the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in fifteen minutes. 1-Year Manufacturer's Warranty.

Prevent Water Heaters from flooding your property:
Water Heaters have a limited life, then leak after years of corrosion. Water Heaters are generally considered a maintenance-free appliance, but they are also one of the single most damaging appliances in the home. Because Water Heaters are continually under pressure, even small pressurized leaks can quickly flood and devastate a home. Whether at home, at work, or on vacation these flooding events can go undetected for hours or even days.

FloodStop (FS-1-NPT) Components:
Motorized Full-Port Ball Valve (1" inch NPT pipe threaded)

Control Unit (with Battery Backup 4 X C Size)

Water/Leak Sensor (1-1/4" X 7-1/2")

AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)

Output Contact Wires (2)

FloodStop (FS 3/4-NPT) Components:
Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded)

Control Unit (with Battery Backup 4 X C Size)

Water/Leak Sensor (1-1/4" X 7-1/2")

AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)

Output Contact Wires (2)

FloodStop (FS 3/4-C) Components:
Motorized Full-Port Ball Valve (3/4" Compression)

Control Unit (with Battery Backup 4 X C Size)

Water/Leak Sensor (1-1/4" X 7-1/2")

AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)

Output Contact Wires (2)

How FloodStop (FS 3/4) Works:
The FloodStop valve is installed between the Water Heater and its manual shutoff valve

Water/leak sensor is placed at the base of the Water Heater

Valve stays open until water loss is detected

Water on sensor closes FloodStop valve and sounds alarm

Valve stays closed until problem is attended to and system is reset

Without FloodStop, Flooding Will Continue:
Unexpected appliance failures cause flooding and water damage, which will continue unabated until the problem is discovered and the water supply is manually shut off.

With Flood Stop, Property Damage is Avoided:
Water loss from unexpected appliance failures and supply line ruptures are detected by FloodStop's water/leak sensor, and the water supply is automatically and immediately shut off.

Model # Description Price & Quantity
FS 3/4-NPT 3/4" Pipe Threaded - Full-Port Motorized Ball Valve (Brass)
Works with any 3/4" MIPT supply line $104.38
FS 3/4-C 3/4" Compression - Full-Port Motorized Ball Valve (Brass)
Works with any 3/4" copper applications $112.64
FS 1-NPT 1" Pipe Threaded - Full-Port Motorized Ball Valve (Brass)
Works with any 1" MIPT supply line $117.96
FSAS Additional Sensor for FloodStop Systems - more information $13.54
FSTEW Transformer Extension Wires - more information $13.27
FSC2VEW Controller to valve extension wire - extends reach by 9 feet $13.38

flexible supplies for water heaters

- Or -

FloodStop System for Commercial Water Heaters, Water Softeners, & Whole House Filters

FloodStop (FS 125NPT) automatically shuts off the water supply to the water heater or whole house filter, whether caused by a small continuous leak, broken component, leaking seal, overflow or a ruptured supply line. Powered by AC Adaptor/Transformer or Batteries. Output contacts available, which allow the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in ten minutes. 1-Year Manufacturer's Warranty.

Prevent water damage from failed appliances such as water softeners and commercial water heaters:
Leaks are often small and go unnoticed until significant damage is finally discovered. Such a leak will continue to collect and then seep between flooring and sub-flooring. The damage often goes undetected until the floor is visually buckled or warped, at which time the damage and cost to replace is extensive.

Overflows can be the cause of significant property damage. The actual overflow event typically takes a couple minutes to begin and often goes unnoticed long after if has begun.

FloodStop (FS 125NPT) Components:
Motorized Ball Valve (1.25 inch NPT Fitting)

Control Unit (with Battery Backup 4 X C Size)

Water/Leak Sensor (1-1/4" X 7-1/2")

AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)

Output Contact Wires (2)

How FloodStop (FS 125NPT) Works:
The FloodStop valve is connected to the angle stop and supply line

Water/leak sensor is placed at the base of the appliance or fixture (commercial water heater, water softener, whole house filter, etc.)

Valve stays open until water loss is detected

Water on sensor closes FloodStop valve and sounds alarm

Valve stays closed until problem is attended to and system is reset

Without FloodStop, Flooding Will Continue:
Unexpected appliance failures cause flooding and water damage, which will continue unabated until the problem is discovered and the water supply is manually shut off.

With Flood Stop, Property Damage is Avoided:
Water loss from unexpected appliance failures and supply line ruptures are detected by FloodStop's water/leak sensor, and the water supply is automatically and immediately shut off.

Model # Description Price & Quantity
FS 125NPT 1-1/4" NPT - Motorized Ball Valve (Brass)
Works with any valve with 1-1/2" NPT. outlet $119.95
FSAS Additional Sensors for FloodStop Systems - more information $13.54
FSC2VEW Controller to valve extension wire - extends reach by 9 feet $13.38

flexible supplies for ice makers

- Or -

FloodStop System for Refrigerators, Icemakers or Water Dispensers
FloodStop FS-14-C
FS 1/4-C
Refrigerator and Ice maker components are small and break easily. Water-line breaks develop from movement, accidental bumping and simple vibration. In many cases a crack in the water-line grows from simple vibrations, eventually and unexpectedly rupturing, and then flooding the property. Whether at home, at work, or on vacation these flooding events can go undetected for hours or even days. This FloodStop automatically shuts off water supply to the refrigerator and sounds an alarm, leaving all other household fixtures and appliances operational. It's easy to install and you'll never have to worry about a leak that will flood your home.

FloodStop (FS 1/4-C) automatically shuts off the water supply to the Icemaker or Water Filter and sounds an alarm, leaving all other household fixtures and appliances operational. Easily installed in ten minutes. 1-Year Manufacturer's Warranty.

FloodStop (FS 1/4-C) Components:
Motorized Ball Valve (1/4 inch Compression Fitting)

Water/Leak Sensor (1.25" X 7.5")

AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)

Output Contact Wires (2)

How FloodStop (FS 1/4-C) Works:
The FloodStop valve is connected to the angle stop and supply line

Water/leak sensor is placed at the base of the appliance (Icemaker/Refrigerator, Water Filter, etc.)

Valve stays open until water loss is detected

Water on sensor closes FloodStop valve and sounds alarm

Valve stays closed until problem is attended to and system is reset

Model # Description Price & Quantity
FS 1/4-C FloodStop System for Refrigerators, Icemakers or Water Dispensers
1/4" Compression $93.85
FSAS Additional Sensors for FloodStop Systems - more information $13.54
FSC2VEW Controller to valve extension wire - extends reach by 9 feet $13.38

flexible supplies for ice makers

- Or -

FloodStop System for Sinks & Basins
FloodStop system for Sinks/Basins
FS 3/8-CD
Sink related leaks are often small and go unnoticed until significant damage is finally discovered. Such a leak will continue to collect under the Sink and then seep between the flooring and sub-flooring. The damage often goes undetected until the floor is visually damp or the smell of mildew is present, at which time the damage and cost to replace is extensive.

FloodStop (FS 3/8-CD) automatically shuts off the water supply to the Sink, whether caused by a ruptured supply line, leaking garbage disposal or an overflow. Powered by AC Adaptor/Transformer or Batteries. Easily installed in ten minutes. 1-Year Manufacturer's Warranty.

FloodStop (FS 3/8-CD) Components:
Motorized Ball Valves (Two Valves, 3/8" Compression Fitting)

Control Unit (with Battery Backup 4 X C Size)

Water/Leak Sensor (1.25" X 7.5")

AC Power Adaptor (or use 4x C Batteries as Power Source

Output Contact Wires

How FloodStop (FS 3/8-CD) Works:
The FloodStop valves are connected to the angle stops and supply lines

Water/leak sensor is placed at the base of the fixture (Sink - Laundry Basin - Tub - etc.)

Valve stays open until water loss is detected

Water on sensor closes FloodStop valve and sounds alarm

Valve stays closed until problem is attended to and system is reset

Model # Description Price & Quantity
FS 3/8-CD FloodStop System for Sinks & Basins
Works with any valve with 3/8" comp. outlet $117.58
FSAS Additional Sensors for FloodStop Systems - more information $13.54
FSC2VEW Controller to valve extension wire - extends reach by 9 feet $13.38

flexible supplies for ice makers

- Or -

FloodStop System for Dishwashers or Toilets

FloodStop (FS 3/8-C) automatically shuts off the water supply to the Dishwasher or Toilet, whether caused by a small continuous leak, broken component, leaking seal, overflow or a ruptured supply line. Powered by AC Adaptor/Transformer or Batteries. Output contacts available, which allow the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in ten minutes. 1-Year Manufacturer's Warranty.

Prevent water damage from failed Dishwasher or Toilet and Supply Line:
Dishwasher leaks are often small and go unnoticed until significant damage is finally discovered. Such a leak will continue to collect under the Dishwasher and then seep between the kitchen flooring and sub-flooring. The damage often goes undetected until the floor is visually buckled or warped, at which time the damage and cost to replace is extensive.

Toilet overflows can be the cause of significant property damage. The actual overflow event typically takes a couple minutes to begin and often goes unnoticed long after the occupant as left the bathroom.

FloodStop (FS 3/8-C) Components:
Motorized Ball Valve (3/8 inch Compression Fitting)

Control Unit (with Battery Backup 4 X C Size)

Water/Leak Sensor (1-1/4" X 7-1/2")

AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)

Output Contact Wires (2)

How FloodStop (FS 3/8-C) Works:
The FloodStop valve is connected to the angle stop and supply line

Water/leak sensor is placed at the base of the appliance or fixture (Dishwasher, Toilet, 3/8" Icemaker, etc.)

Valve stays open until water loss is detected

Water on sensor closes FloodStop valve and sounds alarm

Valve stays closed until problem is attended to and system is reset

Without FloodStop, Flooding Will Continue:
Unexpected appliance failures cause flooding and water damage, which will continue unabated until the problem is discovered and the water supply is manually shut off.

With Flood Stop, Property Damage is Avoided:
Water loss from unexpected appliance failures and supply line ruptures are detected by FloodStop's water/leak sensor, and the water supply is automatically and immediately shut off.

Model # Description Price & Quantity
FS 3/8-C 3/8" Compression - Motorized Ball Valve (Brass)
Works with any valve with 3/8" comp. outlet $97.85
FSAS Additional Sensors for FloodStop Systems - more information $13.54
FSC2VEW Controller to valve extension wire - extends reach by 9 feet $13.38

flexible supplies for ice makers

- Or -

Optional Accessories

Model # Description Price & Quantity
FSAS Additional Sensors for FloodStop Systems - more information $13.54
FSTEW Transformer Extension Wires for Water Heater FloodStops - more information $13.27
FSC2VEW Controller to valve extension wire - extends reach by 9 feet $13.38
3/4" x 1/8" bushing $5.67
3/4" x 1/4" bushing $5.81
3/4" x 3/8" bushing $3.81
3/4" x 1/2" bushing $2.92
3/4" Fips x 1/2" S reducing adapter $4.22
3/4" x 1/2" brass reducing coupler (AKA bell reducer) $5.07
3/4"FIPS x 5/8" OD Fips x compression adapter $4.49
3/4"FIPS x 1/2" OD Fips x compression adapter $7.56

- Or -

Flood Stop Systems - Typical Installation Examples
Your installation requirements may be different
Flood Stop system - water heater installation Flood Stop system - washing machine installation
Water Heater Washing Machine

"How does it work?"
Simple! You'll install a FloodStop motorized ball valve(s) upstream of each supply line and place our water sensor on the floor behind the unit that needs detection. If water leaks due to a broken line or the failure of ANY internal component of your plumbing fixture, the control unit tells the motorized ball valve(s) to shut off the water and sound an alarm.

"So these systems can prevent leaks or flooding?"

Yes they can; whether it's a small leak or large flood, FloodStops shut off the water at the appliance. They protect against broken lines, bursting lines and failure of internal components of your plumbing fixture.

"If there is no electricity running to the valve (either because they haven't been hooked up or the sensor has touched water), are the valves normally open or closed?"

In their normal position, the FloodStop valves are open and will allow water to pass through; once water touches their sensor, the motorized ball valve is tripped and the valves are closed. The valve(s) will remain closed until the sensors are dried and the reset "Open" button is pressed. The Controller has a battery port for 4 X C size batteries, which will serve as a battery backup in case of a power outage. The same batteries will serve as the primary power source if a nearby electrical outlet is not available (battery life 1 year).

"Does the FloodStop system shut off water to the whole house?"
No, this is a point of use product; it only shuts the water off at the source of the leak. Why shut off the water to your whole house if the cause of the problem is just at the washing machine, for instance? Whole house systems are much more expensive and usually require a plumber to install.

"What should I do after the system has detected a leak?"
If a leak has occurred, turn the manual valve(s) to the off position, investigate and repair/stop the leak, dry the sensor, and reset the controller by pressing the "Open" button.

"Are FloodStop systems difficult to install?"
No, if you can install a garden hose, you can install FloodStop. Installation takes 5 to 10 minutes, and your home will be protected against many sources of water damage.

"Why would I need to use the transformer extension wire?"
Unlike the washing machine and the icemaker, the water heater is not always located next to an electrical outlet, and so you may need to use the 15-foot-long low-voltage extension wire.

"Why would I need an additional sensor?"
You can increase your area of protection by adding extra sensors near your fixtures, such as behind your dryer or laundry tray/sink. Additional sensors can also be placed in your water heater's drain pan, as well as on the floor nearby (in case a leak sprays outside the pan); also, you may choose to install a sensor under your icemaker valve, another behind the refrigerator and a third near your icemaker's filter (if you have one).

"What about braided hoses, aren't they burst proof?"
You should use braided hoses whenever you can (especially on your washing machine), and take every precaution to avoid water damage, but hoses are not the only source of flooding. And, braided hoses are not burst proof, but only burst resistant. There are a wide variety of clamps, valves, pumps, drains, etc. inside many fixtures that can fail. (FloodStop was designed after the inventor suffered a home flood due to a switch failure that did not tell his washing machine when to stop filling with water. Water continued to run into the washer and flooded the house for 3 hours before it was discovered.)

We hope that we have helped you on this page with these flood prevention kits.

Alphabetical Product Listing: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

go to contact us | go to our welcome page | go to faq's
go to privacy guarantee | go to return policy | go to view cart
The most convenient mail-order Plumbing Store.

FloodStop System for Water Heaters
FS-3/4-NPT	FS 3/4-C (compression)	FS-1-NPT
FloodStop (FS 3/4) kit automatically shut off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. Powered by AC Adaptor/Transformer or Batteries. Output contacts available, which allow the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in fifteen minutes. 1-Year Manufacturer's Warranty. Prevent Water Heaters from flooding your property: Water Heaters have a limited life, then leak after years of corrosion. Water Heaters are generally considered a maintenance-free appliance, but they are also one of the single most damaging appliances in the home. Because Water Heaters are continually under pressure, even small pressurized leaks can quickly flood and devastate a home. Whether at home, at work, or on vacation these flooding events can go undetected for hours or even days. FloodStop (FS-1-NPT) Components: Motorized Full-Port Ball Valve (1" inch NPT pipe threaded) Control Unit (with Battery Backup 4 X C Size) Water/Leak Sensor (1-1/4" X 7-1/2") AC Power Adaptor (or use 4 X C Batteries as Primary Power Source) Output Contact Wires (2) FloodStop (FS 3/4-NPT) Components: Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded) Control Unit (with Battery Backup 4 X C Size) Water/Leak Sensor (1-1/4" X 7-1/2") AC Power Adaptor (or use 4 X C Batteries as Primary Power Source) Output Contact Wires (2) FloodStop (FS 3/4-C) Components: Motorized Full-Port Ball Valve (3/4" Compression) Control Unit (with Battery Backup 4 X C Size) Water/Leak Sensor (1-1/4" X 7-1/2") AC Power Adaptor (or use 4 X C Batteries as Primary Power Source) Output Contact Wires (2) How FloodStop (FS 3/4) Works: The FloodStop valve is installed between the Water Heater and its manual shutoff valve Water/leak sensor is placed at the base of the Water Heater Valve stays open until water loss is detected Water on sensor closes FloodStop valve and sounds alarm Valve stays closed until problem is attended to and system is reset Without FloodStop, Flooding Will Continue: Unexpected appliance failures cause flooding and water damage, which will continue unabated until the problem is discovered and the water supply is manually shut off. With Flood Stop, Property Damage is Avoided: Water loss from unexpected appliance failures and supply line ruptures are detected by FloodStop's water/leak sensor, and the water supply is automatically and immediately shut off.

Model #	Description	Price & Quantity
FS 3/4-NPT	3/4" Pipe Threaded - Full-Port Motorized Ball Valve (Brass) Works with any 3/4" MIPT supply line	$104.38
FS 3/4-C	3/4" Compression - Full-Port Motorized Ball Valve (Brass) Works with any 3/4" copper applications	$112.64
FS 1-NPT	1" Pipe Threaded - Full-Port Motorized Ball Valve (Brass) Works with any 1" MIPT supply line	$117.96
FSAS	Additional Sensor for FloodStop Systems - more information	$13.54
FSTEW	Transformer Extension Wires - more information	$13.27
FSC2VEW	Controller to valve extension wire - extends reach by 9 feet	$13.38

Flood Stop Systems - Typical Installation Examples Your installation requirements may be different

Water Heater				Washing Machine


	Copyright © 1995-2010. PlumbingStore.com