Drainosaur - Water Removal System from the PlumbingStore

Drainosaur - Water Removal System

go to water sump pumps - go to emergency water and battery back up sump pumps - go to sewage ejector package
go to battery back-up pump systems by Zoeller - go to Grundfos sump pumps

These under sink pump systems remove water from laundry trays, sinks, etc. (not toilets) where gravity drainage is impractical.
Great for basements or areas where the main drain is higher. Designed for above ground.
- systems are UL listed, CSA approved, and the basins are IAPMO approved -

WRS-6 Drainosaur

WRS-6
Max head
5' 10' 15' 18'
2,750gph 1,740gph 720ghp Shut-off

Features:

Includes 5-gallon polypropylene tank

1-1/2" Fips side intake port tank lid

1-1/2" Fips top discharge port

2" Fips top vent port

Easy to remove filter trap

Outside basin dimensions: 15.7" high x 15.5" wide

Includes 3/10HP automatic submersible sump pump
• #6-CLA pump
• 8ft, 3-prong, grounded power cord
• 1-1/2" diameter pip from pump to lid

Special Sale Price: #DR-WRS-6 Drainosaur = $218.80
Water removal systems are not for use with toilets.
Click here for sewage ejection systems

- Or -

WRS-5 Drainosaur Jr.

WRS-5
Max head
5' 10' 15' 18'
900gph 660gph 480ghp Shut-off

Features:

Includes 5-gallon polypropylene tank

1-1/2" Fips side intake port tank lid

1-1/2" Fips top discharge port

2" Fips top vent port

Easy to remove filter trap

Outside basin dimensions: 15.7" high x 14.5" wide

Includes 1/6HP automatic submersible sump pump
• #5-ASP pump
• 10ft, 3-prong, grounded power cord
• 1" diameter pip from pump to lid

#DR-WRS-5 Drainosaur Jr. = $282.91
Water removal systems are not for use with toilets.
Click here for sewage ejection systems

- Or -

WRSC-6 Compact Drainosaur

WRSC-6
Max head
5' 10' 15' 19'
2,750gph 1,750gph 750ghp Shut-off

Features:

Includes 3.5-gallon polypropylene tank
(only 10-1/2" high)

1-1/2" Fips side intake port tank lid

1-1/2" Fips top discharge port

2" Fips top vent port

Easy to remove filter trap

Outside basin dimensions: 10.6" high x 14.5" wide

Includes 3/10HP automatic submersible sump pump
• #6-CLA pump
• 8ft, 3-prong, grounded power cord
• 1-1/2" diameter pip from pump to lid

#DR-WRSC-6 Compact Drainosaur = $227.70
Water removal systems are not for use with toilets.
Click here for sewage ejection systems

- Or -

WRS-8E Drainosaur 2

WRS-8E
Max head
5' 10' 15' 22'
3,120gph 2,700gph 1,980ghp Shut-off

Features:

Includes 5-gallon polypropylene tank

1-1/2" Fips side intake port tank lid

1-1/2" Fips top discharge port

2" Fips top vent port

Easy to remove filter trap

Outside basin dimensions: 15.7" high x 14.5" wide

Includes 1/3HP automatic submersible sump pump
• 3/4" solid waste handling capability
• 8ft, 3-prong, grounded power cord
• 1-1/2" diameter pip from pump to lid

#DR-WRS-8E Drainosaur = $387.35
Water removal systems are not for use with toilets.
Click here for sewage ejection systems

- Or -

to installation and troubleshooting this model
to sump backup alarms

Sump Pump Drain Kits - Select The Pump For Your Application
These pumps remove water from areas where gravity flow is not available. Typical applications include, laundry tray pump, wet bar sink, lavatory, air conditioning condensate or dehumidifier water removal. It can also be used in conjunction with dishwashers and garbage disposal applications.
Zoeller drain pump
pump includes: basin, check valve, & pump
view installation: standard and internal trap Basin Features:

Polypropylene construction

Corrosion resistant

High Capacity

Gasket Sealed polypropylene lid

2" NPT vent

1 1/2" NPT discharge

1 1/2" compression slip fit for top & side intake.
NOTE: 132 comes pre assembled for side inlet only

Threaded connections for easy installation

May be installed with internal trap for space savings

Gas tight cover

Temperature rated 130°F

Fits under most sinks

Basin passes 10" stack test

Pump Features:
(Models 53, 55, 57, 59, 98)

Passes laundry lint

Automatic, float operated mechanical switch

115 V/1 Ph., all drain pump series

9ft UL listed 3-wire cord & plug
(15ft cord std. on model 98)

Stainless steel screws, guard, handle & switch arm

Passes 1/2" spherical solids

1 1/2" NPT discharge

Non-clogging vortex impeller

18" x 22" Polyethylene basin and lid

Internal discharge pipe to lid

#30-0181 check valve

Passes laundry lint

Automatic, float operated mechanical switch

Cast iron housing

Pump Features:
(Model 72)

Passes laundry lint

115 V/1Ph., all drain pump series

9ft. UL listed 3-wire cord and plug

Stainless steel screws, switch arm and lower motor housing

Oil free

Passes 3/8" spherical solids
1 1/2" NPT discharge
3400RPM

Non-clogging vortex impeller

Temperature rated 110°F

cCSAus certified pump

Sump Pump Drain Kits

Basin Model#	Pump Description	Pump Model Number	HP	RPM	Size of Solids Passed	Price & Quantity
105-0001	Cast iron pump (1 1/2" inlet) Glass filled polypropylene base with built in strainer	M53	.3	1550	1/2"	$228.23
110-0001	Bronze pump Glass filled polypropylene base with built in strainer	M55	.3	1550	1/2"	$695.14
115-0001	Cast iron pump	M57	.3	1550	1/2"	$247.89
120-0001	Bronze pump	M59	.3	1550	1/2"	$830.82
131-0001	Cast iron pump	M98	.5	1725	1/2"	$315.90
132-0001	Thermoplastic pump (pre-assembled for side inlet only)	M72	.3	3400	3/8"	$236.18
104-0005	Thermoplastic pump (check valve sold separately)	M72	.3	3400	3/8"	$176.65
105-0010	Cast iron pump (2" inlet) with 3-wire cord and plug * This pump comes with a different basin	M53	.3	1550	1/2"	$279.68
135-0005	Cast iron pump with vertical float switch - high head * This pump comes with a different basin	WM152	.4	3450	3/4"	$355.21
Check Valve	Sump pump check valve for 1 1/2" pipe - (2) rubber sleeves (4) clamps					$13.89

- Or -

Replacement Drain Pumps
These are replacement pumps for the systems shown above.

Pump Model#	HP	RPM	Size of Solids Passed	Price & Quantity
M72	.3	3400	3/8"	$113.25
M53	.3	1550	1/2"	$148.69
M55	.3	1550	1/2"	$194.07
M57	.3	1550	1/2"	$177.15
M59	.3	1550	1/2"	$593.43
M98	.5	1725	1/2"	$254.99
WM152	.4	3450	3/4"	$251.84

- Or -

Note: the WM152 is designed only to be used as a replacement pump for the drain pump system model#135-0005

Water removal systems are not for use with toilets.
click here for sewage ejection systems

"Can I safely use an air admittance valve (or "auto vent") on any of the above systems?"

Although some people have installed an air admittance valve on the above systems, we will never suggest or recommend that you do so. We always recommend installing a vent all the way to the roof (and as per your local codes). We have had people write us stating that when they installed an air admittance valve the flapper in the valve can chatter and create vibration. The right way to go is to install a non-mechanical vent, all the way to the roof, and as per your local codes.

read many interesting quotes, such as:
"The old man laughed loud and joyously, shook up the details of his anatomy from head to foot, and ended by saying such a laugh was money in a man's pocket, because it cut down the doctor's bills like anything." - Mark Twain

We hope that we have helped you with drain systems at PlumbingStore.com

Alphabetical Product Listing: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

go to contact us | go to our welcome page | go to faq's
go to privacy guarantee | go to return policy | go to view cart
The most convenient mail-order Plumbing Store.

Special Sale Price: #DR-WRS-6 Drainosaur =	$218.80
Water removal systems are not for use with toilets. Click here for sewage ejection systems

#DR-WRS-5 Drainosaur Jr. =	$282.91
Water removal systems are not for use with toilets. Click here for sewage ejection systems

#DR-WRSC-6 Compact Drainosaur =	$227.70
Water removal systems are not for use with toilets. Click here for sewage ejection systems

#DR-WRS-8E Drainosaur =	$387.35
Water removal systems are not for use with toilets. Click here for sewage ejection systems

Sump Pump Drain Kits - Select The Pump For Your Application
These pumps remove water from areas where gravity flow is not available. Typical applications include, laundry tray pump, wet bar sink, lavatory, air conditioning condensate or dehumidifier water removal. It can also be used in conjunction with dishwashers and garbage disposal applications.
pump includes: basin, check valve, & pump view installation: standard and internal trap	Basin Features: Polypropylene construction Corrosion resistant High Capacity Gasket Sealed polypropylene lid 2" NPT vent 1 1/2" NPT discharge 1 1/2" compression slip fit for top & side intake. NOTE: 132 comes pre assembled for side inlet only Threaded connections for easy installation May be installed with internal trap for space savings Gas tight cover Temperature rated 130°F Fits under most sinks Basin passes 10" stack test
Pump Features: (Models 53, 55, 57, 59, 98) Passes laundry lint Automatic, float operated mechanical switch 115 V/1 Ph., all drain pump series 9ft UL listed 3-wire cord & plug (15ft cord std. on model 98) Stainless steel screws, guard, handle & switch arm Passes 1/2" spherical solids 1 1/2" NPT discharge Non-clogging vortex impeller 18" x 22" Polyethylene basin and lid Internal discharge pipe to lid #30-0181 check valve Passes laundry lint Automatic, float operated mechanical switch Cast iron housing	Pump Features: (Model 72) Passes laundry lint 115 V/1Ph., all drain pump series 9ft. UL listed 3-wire cord and plug Stainless steel screws, switch arm and lower motor housing Oil free Passes 3/8" spherical solids 1 1/2" NPT discharge 3400RPM Non-clogging vortex impeller Temperature rated 110°F cCSAus certified pump


	Copyright © 1995-2008. PlumbingStore.com